Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing
Customized pcb test checking fixture pins for PCB testing

Customized pcb test checking fixture pins for PCB testing

2018-12-14 18:14:10     5.0 /5

Connect testing device with DC 12V,please must connect positive and negative terminal correctly;There are three anti-paint on the tin point on the back of the board, so it may not be touched when

  • Trademark : HytePro®
  • Part Number : HTP-FTR-109
  • PIN : Any pin you need
  • Operating current : 2.0A
  • Operating Voltage : Below 12V@25°C
  • Plastic Material : PA46
  • Customizable : Yes
  • Spring Material : Stainless steel 304
  • Tube&Needle : Brass alloy C3604
  • Plating : Nickel plating80-120μ,Gold plating3μ"
  • Pin elastic : 100-120g
  • Durability : 100000 times(The spring force remains within the range)
  • Service life : Within 100,000 times
  • Support : SMT
  • RoHS : Compatible
  • PDF drawing :
  • Trademark : HytePro®
  • Part Number : HTP-FTR-109
  • PIN : Any pin you need
  • Operating current : 2.0A
  • Operating Voltage : Below 12V@25°C
  • Plastic Material : PA46
  • Customizable : Yes
  • Spring Material : Stainless steel 304
  • Tube&Needle : Brass alloy C3604
  • Plating : Nickel plating80-120μ,Gold plating3μ"
  • Pin elastic : 100-120g
  • Durability : 100000 times(The spring force remains within the range)
  • Service life : Within 100,000 times
  • Support : SMT
  • RoHS : Compatible
  • PDF drawing :

Customized pcb test checking fixture pins for PCB testing


- Test logic:

White dots of “test LED instructions” shows as LED working,it means testing OK, OK,otherwise,means not OK.

Besides,White dots of “test LED instructions” shows as the LED on pcb(red/green),it means testing OK, OK,otherwise,means not OK.

 

- Note:

- Connect testing device with DC 12V,please must connect positive and negative terminal correctly.

- There are three anti-paint on the tin point on the back of the board, so it may not be touched when placed in the test stand. You could press the handle several times until the Lamp 1 and 2 lamp light up;Or you can gently remove the three anti-paint on the back.

- The test must be pressed in the order from 1 to 6, otherwise the testing result will be incorrect;

- If you do not press in order accidentally , press 5, 6 in order to restore the logical sequence and then retest from 1.

- There is some spare parts of pogo pin,when pogo pin of testing machine has been damaged,you could replaced.

 

Hytepro produces all kinds of pogo pcb circuit board test jig fixture,please contact us if you need custom suggestion.


Customized pcb test checking fixture pins for PCB testing

Customized pcb test checking fixture pins for PCB testing


hytepro pogo pin connector, Wet weld coverage is above 95%;Pogo Pin or Spring Pin mainly used in Mobile, Communication, Charger, Medical Devices;

hytepro pogo pin connector, Wet weld coverage is above 95%;Pogo Pin or Spring Pin mainly used in Mobile, Communication, Charger, Medical Devices;

E-mail: sales99@hytepro.com

Address: R1307,Sunrising Plaza,Minke Road East,Shiqi Dist.,ZS,China

Feedback Feedback